Little Genius parts

SweetFeet

Well-known Member
Looking for some parts for a Little Genius #8 plow.
Prefer rusty finish if possible - but would buy painted parts too.

A.
Need ONE: SPRING, Raising 1-1/2" O.D., 20-1/2" long and 57-1/2 coils. (for furrow wheel side, lift assist)
Listed on page 43 of manual, reference #20. Part #PO 107.
a166490.jpg" width="650"


B.
Need ONE or TWO wheel lugs... cannot find a part number in manual. Want same shape as in photo.
a166491.jpg" width="650"


C.
Need TWO: CLAMPS, for latch rod.
On page 48 of manual, reference #6. Part #2 193
a166492.jpg" width="650"


D.
ALSO need ONE: ROD, for latch (just the half from mid-handle out to the latch – shown in photo with the clamps).
On page 48 of manual. Part # 23 391.

Thanks if you can help or know someone I can contact. I know this site does not sell these parts. And I don't know how to post on Ads.
 
Hi SweetFeet, just bought a 3 bottom plow like yours. It came to the UK on the lease-lend scheme during WW2 and has been repainted recently in the correct colors. Hope to use this weekend at our tractor club working weekend behind the 10-20. MJ
 
MJ,

This one we will keep rusty for using with our rusty old Regular.

We have a painted one for behind our F20... it's almost the right colors. I think there is one more part that should be black.
 
You must have very easy plowing ground if a 10-20 McCormick will pull a 3 bottom. 2-12" is what we pulled here.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top