I'm looking at ordering a new cylinder for my 8 Ft. I.H. transport disk from ASC.
The one I'm looking at has a 1 1/16 rod. with an 8 inch lift. Retracted length of 20 inches 2500 psi.
My question is, is it big enough to lift the disk up and down without blowing the seal or something else. The one I have been using on it has an 1 1/8 rod on it.
The one I'm looking at has a 1 1/16 rod. with an 8 inch lift. Retracted length of 20 inches 2500 psi.
My question is, is it big enough to lift the disk up and down without blowing the seal or something else. The one I have been using on it has an 1 1/8 rod on it.