iso case 220 baler parts.

Looking for the sprocket that runs the drive intake. Or the intake drive? The one I have says 95004s 6 on it.

Any help would be greatly appreciated!
 
There is a gentleman by the name of Adirondack Case Guy on the Case forum that had some Case baler parts for sale recently. Try contacting him with your requests on the Case forum.
Kow Farmer Kurt
 
I did not get any sprockets, you can replace it with a standard tooth one if you have too, I might have one but they are cast and I doubt it would come off with out breaking
cnt
 
I think this one was cracked when my husband removed it from the other baler. So, I know how that goes. If I can't find one anyplace we might be interested in seeing if you can get that one out with minimal damage.

I know I've seen someplace that will reverse engineer sprockets I just don't know if it cost prohibitive.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top