bush hog 2510 cross shaft Rubber Element help

tazzer

Member
ok after more looking iv found that the seal is a Rubber Element
inside the joint. to replace the whole thing is over 850 bucks and i cannot seem to find just the Rubber Element. So has any one else have any dealings with this that can me out on what my options are besides replacing the whole thing which wont happen for awhile lol/
 
A photo would help.

There's all sorts of generic driveshaft places, likely SOMEBODY will have the "seal" you need, if it can be identified!
 
I've got a 2510 with the same joint out. Mine was so bad that the blades were hitting together. When the dealer told me the price, I about fell over. It's just sitting now as it needs some other parts also and it's just not worth putting an $850 part on a machine that old (esp. if the other one goes out next).
 
(quoted from post at 22:39:52 07/07/14) I've got a 2510 with the same joint out. Mine was so bad that the blades were hitting together. When the dealer told me the price, I about fell over. It's just sitting now as it needs some other parts also and it's just not worth putting an $850 part on a machine that old (esp. if the other one goes out next).

yep thats what i was thinking
 

heres a pic of it Bob its from the right side of the cutter when your facing it from the front.

IMG_20140709_224757006_zpsoilgqxm0.jpg

IMG_20140709_224751380_zpsijfdthjc.jpg
[/img]
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top