336 baler Knotter prices

dmiller

Member
Have a fairly worn 336 baler, was wondering if anyone had recently rebuilt the knotter on one and what the cost range is.
Kinda wanted a figure in my head before I called the dealer and was too shocked.
 
An even better question is if it CAN be rebuilt to acceptable standards (depending upon what all is worn), or will need to be replaced.

Either way, it's gonna cost some serious $$$$.

(A knotter is about $2000, and the drive gear/cam is over $500!)
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top