Krone 250B Round Baler

mooboy

Member
Anyone ever work on one of these fixed chamber balers? The aft kicker roller sprocket has become separated from roller. Parts list says they are made into one piece. How was it originally attached? Welded? Press fit? How hard is it to get the roller out of the baler?
 
I'm not sure on a 250 but my m&w is the same as 150
krone and that sprocket is welded on. It has 4
short tack welds around the outside. I just
replaced the sprocket on mine this week. Deluxe
 
(quoted from post at 07:25:42 05/31/14) I'm not sure on a 250 but my m&w is the same as 150
krone and that sprocket is welded on. It has 4
short tack welds around the outside. I just
replaced the sprocket on mine this week. Deluxe

Are the tack welds between the sprocket and the roller? Or are they on the other side? How hard is it to remove the roller?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top