Trevor Meredith
New User
I"m trying to find the right size plates to plant hickory king white corn it has a very large flat kernel and the plates I have are cutting the corn in half , What size do I need???
- Thread starter Trevor Meredith
- Start date
Here is a thought. It will take some leg work on your part & probably a little luck but. I have what is called a Seed Sizing Plate for CASE planter plates. If you want to send me several kernels I will put them in my Sizing Plate & get you the correct CASE plate# & You can then find a cross reference chart & cross it from a CASE plate to a FORD plate. I know it sounds like a pain & a lot of hassle but it is a thought. Email is open if you want. Gerald
If you could secure an extra set of plates to work with!!!
Could you super glue six or eight equally spaced thin washers to the bottom of the plates. If the planter boxes would allow this additional thickness of the plate it might work.
Might could find plastic or brass washers to keep down wear of the box. Could be any material added to the bottom of the plate in order to allow the seed to pass.
Will john Deere plates fit your drill, if so there might be more deere plates out there.
Could you super glue six or eight equally spaced thin washers to the bottom of the plates. If the planter boxes would allow this additional thickness of the plate it might work.
Might could find plastic or brass washers to keep down wear of the box. Could be any material added to the bottom of the plate in order to allow the seed to pass.
Will john Deere plates fit your drill, if so there might be more deere plates out there.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy