Farmall 560 implement size

Anonymous-0 · Apr 28, 2014

I have a farmall 560 diesel with new tires and was wanting to know if it could handle an ih 510 21 hole grain drill. I was also wondering what size field cultivator would be a good matchup for it. Thanks for the help

AJB-830 · Apr 28, 2014

I pulled an IH 510 12 ft. (24 holes) drill with a Brillion cultipacker hooked behind with a Farmall 400. Your 560 should pull it easy. Al

AG in IN · Apr 28, 2014

(quoted from post at 22:28:14 04/28/14) I have a farmall 560 diesel with new tires and was wanting to know if it could handle an ih 510 21 hole grain drill. I was also wondering what size field cultivator would be a good matchup for it. Thanks for the help

Should have no trouble with the drill. We have pulled a 21 X 7 5100 behind a 300 and a 350 diesel.

Field cultivator will depend on the type of machine, tooling, soil types, depth of use, and other factors, including if you want to risk working the snot out of a D-282.

AG

DeltaRed · Apr 28, 2014

12 to 14 ft machinery would be about right for a 560.Except field cultivator.Subtract 2' from above.3 or 4 bottom moldboard,depending on your soil.

Leroy · Apr 29, 2014

Field cultivator same as disk and I would sujest a 11' in each,as either would work good by themselves but you could tandem them if you wanted in a lot of conditions.

Leroy · Apr 29, 2014

also the 11' would just match 4-30" rows to work up.

Farmall 560 implement size

Anonymous-0

Well-known Member

AJB-830

Member

AG in IN

Member

DeltaRed

Well-known Member

Leroy

Well-known Member

Leroy

Well-known Member

Similar threads