I do my farming with a chisel plow and disc. Had a guy ask me if I'd reseed his alfalfa stand for him. It has gotten to where there is almost no alfalfa left in it (I explained to him about not putting alfalfa right in after alfalfa but he says this is the way he's always done it so.....)
Anyway I don't think I'll do a good job with my chisel, just leave too much alfalfa there to come back (probably doesn't matter since he wants the alfafa). I don't have a mold board. He has a little, worn out 2 bottom dearborn. I could pull this easily with my JD 70 but wasn't sure what quality I would get out of it. Plow is considerably narrower than between the tires on the 70. When done field needs to be very level since it is flood irrigated.
Only 5 acres
Anyway I don't think I'll do a good job with my chisel, just leave too much alfalfa there to come back (probably doesn't matter since he wants the alfafa). I don't have a mold board. He has a little, worn out 2 bottom dearborn. I could pull this easily with my JD 70 but wasn't sure what quality I would get out of it. Plow is considerably narrower than between the tires on the 70. When done field needs to be very level since it is flood irrigated.
Only 5 acres