vermeer hay baler pto tubing

steven in Tn · Jan 26, 2014

do anyone know what size pto tubing i need to replace my shaft on a vermeer 505 super I hay baler, its a waltherscheid but dont know what series. any help would be appreciated

Hogleg · Jan 27, 2014

Here is what I used on my 605H

# 600-7548

Weasler PTO Outer Tube Metric Series #2400

48mm (Dim. A), (3.8mm Wall)
1.5m Length
Interchanges with Walterscheid

# 400-7539

Weasler PTO Inner Tube, Metric Series #2400

39.5mm (4.5mm Wall) (Dim. A)
1.5m Length
Interchanges with Walterscheid

You will get enough to do it twice. Got mine at the local farm store.

Had a devil of a time getting the old ones out. Had to cut them off flush, then use a sawsall to cut a slot on the inside of the stub to relieve pressure, then pounded them out easy. Get new roll pins also.

did not feel comfortable enough to torch them out and not overheat that expensive CV joint, that is also an option.

John

vermeer hay baler pto tubing

steven in Tn

Member

Hogleg

Member

Similar threads