|Implement Alley Discussion Forum|
Re: Putting a snow plow on the front of a tractor
[Show Entire Topic]
[Show Entire Topic]
[Return to Forum]
[Log in to Reply]
On my MF35 chains are a must. If no chains, especially after the base starts freezing, it gets hung up real easy if the front end drops over a incline and it doesn't take much of an incline. Put chains on and it will really go places and push a lot of snow. 4WD would be nice in that regard. Another thing I notice on the MF35 is when backing up with a bit of throttle applied, it doesn't take much for the front end to swing around sideways. Probably due to the extra weight on the front end and no traction on the front wheels.
All of that being said, I am very happy with my plow and 35 combination. Before this we had this same plow with a different framework of course on the Farmall 504. It would push like crazy, but the reverse was very slow, it didn't really work out as well as the 35.
My plow is a very old Western plow with manual angle, made around early 70s or so. Hydraulic angling would be nice.
|Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]|
| Copyright © 1997-2015 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters