shoup parts

Not as good as OEM but pretty good aftermarket ones. It would depend on how long and much you are going to be using the disk. If it is a real heavy primary tillage disk then I would go OEM. If it is a lighter finishing disk and you are not going to be using it much I would go with Shoup.
 
Thanks for the reply they are going to go on my 370 I usually just use it to finish ground for planting. I refuse to go to fiat femmeco for parts so I guess I'll try em .
 
I have some pretty good blades off a AC disc. What diameter and what size/type hole in the middle. You can have these for shipping. (about8 pieces.)
 
Shoup is good, or you might try some blades from ASC. I got a few from them last summer, and so far, I'm happy with them. Spend the extra buck and get the Brazilian ones.
 
(quoted from post at 22:15:14 09/28/13) Shoup is good, or you might try some blades from ASC. I got a few from them last summer, and so far, I'm happy with them. Spend the extra buck and get the Brazilian ones.

I bought a set of Brazilian ones from ASC 2 years ago to rebuild a rebuild my heavy Case disc. One of the outside ones on the back gang cracked right down the middle shortly after putting it to use. It was a defect from the factory where they had switched coils. I welded it, and it has held, it had to be the worst possible one to change.

I haven't bought any blades from Shoup, but all the openers I have bought from them have been OEM or better.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top