Texasmark1
Well-known Member
To get us on the same page, I am talking about a rigid frame implement with a forward gang of discs and a rear gang. The forward gang axle is like positive 30 degrees from the line of travel and the rear gang is negative.
This is a 3 pt implement. Gang width is 8'.
Seriously considering purchasing one tomorrow and wondering on the HP required and 3 pt lift capacity to operate it.
I have a 4wd 65 PTO hp tractor.
Suggestions, helpful info, greatly appreciated.
Thanks,
Mark
This is a 3 pt implement. Gang width is 8'.
Seriously considering purchasing one tomorrow and wondering on the HP required and 3 pt lift capacity to operate it.
I have a 4wd 65 PTO hp tractor.
Suggestions, helpful info, greatly appreciated.
Thanks,
Mark