Fjordman1995
Member
I checked the tinebar on the NH 271 I"ve been working on and I have a question. Is it normal for the tine bar, chain, and gears to move when the baler is not running? I can push the forks in the direction of the bale chamber and there is no resistance for a few inches.
When the sprockets turn, the other shaft coming out of the gearbox and the chain for the knotters turn. Is that "freeplay" normal?
Thanks,
Warren
When the sprockets turn, the other shaft coming out of the gearbox and the chain for the knotters turn. Is that "freeplay" normal?
Thanks,
Warren