I have gone over the baler manual and the knotter service manual and made every adjustment per the book so I think anyway. Now the problem is the right side knotter is missing every single knot, no loop on either end of the twine. The ends are kinda ragged looking, just put new twine knives on yesterday. I adjusted needles, twine disc timing, twine fingers, twine holder, twine box tension per the manual instructions but still no knot on right, left side ties perfect every time and I have tried to set the right side up the exact same. The book shows failed knots but not one with no loop on either end, I'm using 9000 poly twine, thinking about trying some sisal to see if it makes any difference, anyone have any other suggestions? May have to break down and take it to the dealer and have it checked out, I was able to bale about 20 bales in 6 hours of messing around with it today, becoming very frustrating.