NH 570 square baler

JD Farmer · Jun 25, 2013

Before I go look at a used one, Like to know more about the hydraulic tensioning. Is it prone to problems? My old 311 is worn out, new knotters and cam gears will set me back 2000.00.
Local dealer has one for 7590.00 I need to check it out before I decide to give up on small squares or dig deeper if ya know what I mean.

RickB · Jun 25, 2013

Hydraformatic is quite trouble-free. Dropping $2K on a 311 is borderline insanity IMHO. A decent 570 is 3 to 4 times the baler a brand new 311 would be.

mudcreek183 · Jun 25, 2013

I have a 570 would never go back to any of old balers never broke a shear pin or choked in down in the heavest hay.

55deere70 · Jun 27, 2013

I have the hydraulic tension on my 311, makes a good consistent bale. Never had any trouble with it.

NH 570 square baler

JD Farmer

Member

RickB

Well-known Member

mudcreek183

Member

55deere70

Member

Similar threads