Jack in Colo
Member
Does anyone know of a good source for getting new needles for a John Deere 24T baler, the last set of needles I bought was about 1985. Been looking for a new set but having a hard time finding any.
- Thread starter Jack in Colo
- Start date
Jack in Colo
Member
checked with the JD dealer closest to me here but they seemed more concerned with selling me a new baler than looking up parts for my 24T. I'll check with the dealer down south of here maybe they can get some, I know other JD baler models used the same needles so you would think they wouldn't be so hard to come by.
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
Part Number: AFH202537
Replaces Part: AE15136
Part Price: 141.96 USD
Why are you replacing needles? Are they broke or worn out? Those needles are made of maleable iron and can be adjusted to original curvature in a press if they are just bent. I've also seen them welded/brazed after they were broken.
We took them to the dealer's shop and had them bend the needles to the same curvature as a new needle whenever the needles got bent - never did buy a new needle in all the years we had that baler.
We took them to the dealer's shop and had them bend the needles to the same curvature as a new needle whenever the needles got bent - never did buy a new needle in all the years we had that baler.
Jack in Colo
Member
the needles on the baler are still working but I have welded and built them up so many times they are getting a little brittle, if I can find a new set I want to replace them. Been using this baler for smaller fields since I bought it in 1985. I have a couple newer faster balers but the old 24T is still a good baler and would like to keep it in good shape as long as I can.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy