krause disc

756puller

Member
I have a 412 krause disc that i want to reblade. before i tear into it i would like to know the origional disc diameter and i would also like to know the arbor bolt diameter? Does anybody have any specs for this disc?
 
I don't have an answer for your question, but if you don't have any luck, you might try www.kuhnkrause.com and ask for their help.
 
I'm not familiar with the 412, but on most that I have bought the blade size was optional. Whether there was a standard size I do not know. You can probably just measure the bolt size.
 
I think I have a 412. Is this about an 8 footer? Has around 3 inch frame tubing? I will try to measure tomorrow. I am thinking the gang axles are one inch and they are round. I would guess 18 inch blades when new.
 
I measured mine and the axles are 1-1/8" and of all things I forgot to check the model. I am pretty sure it is a 412. It is a little 8 foot tandem.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top