Galen Mitchell
Member
Hello all. Been lurking here a while but this is my first real post. I built this wire winder / trailer for a friend of mine who has quite a few cattle that he puts on stalks every year. I built the trailer from scratch with 4 inch channel and square tube of a couple different sizes, and 3 inch pipe for the tongue and axle supports. Power is delivered via a PTO shaft I slavaged from an old square baler, 4 speed tranny from a junk yard, and 80 roller chain and sprockets. The tranny will give us a good range of speeds to choose from. Should get to try it out next week or so.