(800) 853-2651
SHOP NOW

Bush hog m446

W

WAYNE-N-TX

Member
I recently bought a tractor with a bush hog m446 loader. This thing works real slow. I've been told there's a set screw/bolt that regulates this. If so, where is it. It has a joy stick, two buttons on the control stick, have no ideal what they're for. Have not done a lot with the tractor, just parked in the shed

I've down loaded a manual but the thing says nothing about this, just don't do or don't do that, 57 pages of nothing. Kind of a waste of time.
 
Need to know what tractor it is mounted on and how the hydraulics are sourced from the tractor to the loader valve.

The only set screw that would control the speed would be on the end of the spool valves. Sometimes they have them where they will limit how far the valve opens. I have not seen these type of valves used on a loader. They mainly are on a combine.
 
Sorry, the tractor is Massey Ferguson 4253 95hp cab tractor. The hoses ties into a hydraulic block just in front of the right side door. The joy stick has two buttons on the front of the part you grab when want to use the loader. Have not mastered the picture posting part yet, well, to tell the truth, don't have a camera ;-).

I'll go back when I have time and try the manual again later, mostly safety topics. Have not found the control part yet.
 
You must log in or register to reply here.

Similar threads

C
Bush hog 3pt to Pull type conversion
Replies
18
Views
4K
BarnyardEngineering
BarnyardEngineering
Q
Bush hog position
Replies
2
Views
259
caterpillar guy
C
6
Woods 10 Foot Bush-Hog. Proper size tractor
Replies
7
Views
1K
MARK ROBKE
M
C
Hydraulic cylinder on bush hog loader question
Replies
6
Views
389
Copotay
C
Stroby
1959 John Deere 430W
Replies
8
Views
390
Jim.ME
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top