bucket loader

David Zoanetti · Jan 17, 2013

I have a 1959 Ford 601 with a Freeman loader. I bled the single acting lift cylinders so I am flowing hydraulic fluid but I can"t get them to move. The rear lift arm work fine. Any suggestions?

old · Jan 17, 2013

What is the hyd system you use. A front crank shaft driven pump of the tractor hyds system?? If the tractor system how is it set up?? Does it run off the pressure check plug or does it have a set of levers?? Hard for use to help you help your self with out more info. If off the pressure test plug then the 3 point arms have to be chained down to get pressure and a very poor set up to say the least

David Zoanetti · Jan 20, 2013

The bucket runs off the tractor hydraulic system through a transfer valve on top of the lift cover to a two spool control valve operating the single acting lift arm piston and double acting bucket piston.

old · Jan 20, 2013

3 point arms need to be chained down then to work and as I said a poor system at best

bucket loader

David Zoanetti

New User

old

Well-known Member

David Zoanetti

New User

old

Well-known Member

Similar threads