Joint of unknown origin

Fritz Maurer · Jan 17, 2013

Found this joint at a scrapyard, just thought I'd offer it up to whoever wants it. On the pinch-bolt end it is a 1-3/4" six-spline. The other end is 1-1/4" square. the cross assem. is in perfect condition.

casenut1 · Jan 17, 2013

when you said joint, i thought you were on something else. anyway it looks like it is off an old binder.

Dick2 · Jan 18, 2013

We had one of those on some type of implement; I think it was one of the pull-type swathers that we had.

Leroy · Jan 18, 2013

That spline end is for the earlier John Deere G tractors as they had a 1 3/4" power shaft so advertise it under John Deere as they are almost unable to be found today if somebody wants to match a PTO powered implement to an antique John Deere tractor for shows. The square end is normal pto shaft size.

rrlund · Jan 18, 2013

Looks to me like it's off a John Deere sickle mower.

Joint of unknown origin

Fritz Maurer

Well-known Member

casenut1

Well-known Member

Dick2

Well-known Member

Leroy

Well-known Member

rrlund

Well-known Member

Similar threads