Dearborn two disc plow setup

rgvnaa · Dec 20, 2012

Hi, i recently bought at dearborn two disc plow in good condition, i was wondering if any body could help me with the set up of the plow. the plow does not seem to be digging in like it should. also i was wondering if the bearing caps were normal or revese thread. if any body could point me the way or share some advice on the set up and plowing i would appreciate it. thanks

maxwell99 · Dec 21, 2012

try n tractor . com

go to this site, you should find your model number and they will have a manual you can look at.

however, this is a locked site so you may not be able to open the site.

if not, try n tractor.com and work from there.

its a great site with all kinds of manuals of old ford and ferguson equipment.

rgvnaa · Dec 21, 2012

Thanks. I'll look.

Bill Corder · Dec 21, 2012

(quoted from post at 23:10:00 12/20/12) Hi, i recently bought at dearborn two disc plow in good condition, i was wondering if any body could help me with the set up of the plow. the plow does not seem to be digging in like it should. also i was wondering if the bearing caps were normal or revese thread. if any body could point me the way or share some advice on the set up and plowing i would appreciate it. thanks

Send me an email and I'll send you a copy.

Bill Corder · Dec 21, 2012

If it is a Dearborn 10-80 I'll send you a copy of the manual.

[email protected]

Jeff B. · Dec 22, 2012

I have a Dearborn 10-14 plow. I don"t suppose you"d have any info on that one would you?
If so, my e-mail"s open.
Thanks,
Jeff

Dearborn two disc plow setup

rgvnaa

Member

maxwell99

Well-known Member

rgvnaa

Member

Bill Corder

New User

Bill Corder

New User

Jeff B.

Member

Similar threads