|
| |
| Implement Alley Discussion Forum |
Topic: Re: two way plow
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| DeltaRed
12-02-2012 21:33:34
67.6.219.50
|
 I pull a 4x16 with a 1256(125hp) in heavy irrigated ground.We figure 25-30 hp per bottom.You will need frontend wts. |
|
|
| DeltaRed
12-02-2012 21:40:34
67.6.219.50
|
|
Re: two way plow in reply to DeltaRed, 12-02-2012 21:33:34
|
|
|  I also pull 3x14 with a 706 |
|
|
| HoosierHog
12-02-2012 22:10:48
69.130.191.125
|
|
Re: two way plow in reply to DeltaRed, 12-02-2012 21:40:34
|
|
| Nice equipment!! I like the idea but I can't justify that in my operation yet I'm still considered a hobby farm but some day!Delta red I think read some were you in Colorado? Is that so what county are you in. I'm from greely area but most of my family is from calhan, out in Eastern elpaso county. |
|
|
| DeltaRed
12-03-2012 06:39:31
67.6.219.50
|
|
Re: two way plow in reply to HoosierHog, 12-02-2012 22:10:48
|
|
| Hoosier,I was raised at Ft.Collins/Wellington.Also spent a fair bit of time at Nunn ....Ault...Greely...What tractor are you useing?You should be able to pickup a nice plow for under $500. |
|
|
| HoosierHog
12-03-2012 14:08:36
69.130.191.125
|
|
Re: two way plow in reply to DeltaRed, 12-03-2012 06:39:31
|
|
| I use an oliver 1850 about 90-95 pro hp. I have seen a 4-16 rollover plow sell here for 3500 I saw a couple jd rollover plows here I n Indiana on tractor house a 3-16 and a 4-16 modle F835 both of them and wanted 1500 and 2000. I just can't justify that kind of money on a plow. I spent 550$ on my 5 bottom Oliver plow, I took off one bottom and I set it on 18in then reset on 16in I can pull it on 5-16 ok 4-18 is ok a bit better then 4-16 I can pull in any ground no matter what. So I left it set as a 4-16. |
|
|
| DeltaRed
12-03-2012 15:36:28
67.6.219.50
|
|
Re: two way plow in reply to HoosierHog, 12-03-2012 14:08:36
|
|
| Here,an 1850 is a 3 bottom tractor.3x14/16 would be perfect.That 706 pictured is turboed to 90+ hp.In the heavy ground/sod,3x14 is plenty.On the light soils,it will pull 4x14.See the extra long frame on the 706/3 bot?that is for the 4th bottom. |
|
|
| Brendon-KS
12-03-2012 17:32:55
63.245.190.37
|
|
Re: two way plow in reply to DeltaRed, 12-03-2012 15:36:28
|
|
| Growing up in southeast Colorado our neighbor pulled a 4-bottom IH rollover with his Deere 4240 and you could tell it struggled in places. Another neighbor pulled a similar plow with a 5088 FWA and it appeared to be a good match. I worked for a farmer who had a pair of IH 3-bottom rollovers and put one on a 4030 (80hp) and the other on a 4010 with a ~90hp 4020-sized engine. In either case it was about all the tractor wanted. |
|
|
| DeltaRed
12-03-2012 06:07:07
67.6.219.50
|
|
Re: two way plow in reply to HoosierHog, 12-02-2012 22:10:48
|
|
| Delta county.On the western side. |
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|