Topic: Re: Deere 44H questions
|Implement Alley Discussion Forum|
[Show Entire Topic] [Return to Forum]
[Show Entire Topic]
[Return to Forum]
[Add a Reply]
Looks like you must have a 45 or 46 B with the high speed tranny if you want to put a hydrolic lift plow behind it and if the tractor has the orignal engine in it for to pull that plow you will have to have very easy plowing ground as that plow would ordinarly be used behind a late model B with 28 HP and not your model with 20HP. The same bottom is used for the 10", 12", and 14" cut plows and pulls harder than the 12" cut bottom that was on the No. 52 plow that was commonly used behind that tractor. That 52 was what I had behind a 46 B and it was all low gear plowing. I did have the power trol on my tractor and the cast wheels for weight and still had 300#+ concrete on each rear wheel. We had converted the 52 plow to hydrolic lift before I had that tractor as we had it behing a 49 B to start with that followed a 38 A and that 52 plow was bought new by a neighbor with a 39 B that had the lower gearing but same power you have.
|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|
| Copyright © 1997-2013 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.|