plow to plow pics

chucksoliver77 · Nov 4, 2012

well we never had our fall plow day because of all the rain here in nj. after 3 years of looking for a gauge wheel for my plow i saw a hub for sale on eBay, bought it and built my own, now the plow is in storage and we are ready for snow. chuck

4020-101 · Nov 4, 2012

Nice lookin rig I hope we get a lot of snow

BushogPapa · Nov 5, 2012

Well Done..real nice job on the gage wheel...

We didn't plow at our show either..too wet..

At least you will be ready..!!!

Ron..

JohnDeereJimOhio · Nov 5, 2012

My brother just poured a new concrete driveway, and he was thinking of usuing used tires on his bade to not tear it up. However yours looks like a piece of PVC pipe a good idea can you explain how you attached it? Also can you send some close up pics of it? Thanks,
Jim

chucksoliver77 · Nov 5, 2012

4020-101, thanks for looking, chuck

chucksoliver77 · Nov 5, 2012

Ron, I wonder if i will need to add weight on the tractor now that i have a gauge wheel carrying the plow instead of the hitch and draft from the plow? thanks, chuck

chucksoliver77 · Nov 5, 2012

JohnDeereJimOhio, it stays on with no fasteners. i took a 2"PVC pine and made a skill saw cut in it and made an angle cut on one end to get it started over the cutting edge and drove it on with a block of wood and a sledge hammer. it stays on fine as long as you don't back drag with it. chuck

JohnDeereJimOhio · Nov 6, 2012

Thanks for your reply we will try this idea now. Much appriciated....

plow to plow pics

chucksoliver77

Well-known Member

4020-101

Member

BushogPapa

Well-known Member

JohnDeereJimOhio

Member

chucksoliver77

Well-known Member

chucksoliver77

Well-known Member

chucksoliver77

Well-known Member

JohnDeereJimOhio

Member

Similar threads