seed drop tubes for Van Brunt drill

Buffy1

New User
Anyone out there have enough of the original metal
ribbon seed drop tubes for a JD Van Brunt tractor
drill? A couple of the seed cups these tubes attach
to would also be nice. I have the rubber drops. They
kink, The flex rubber tubes come off and the obvious
result is a skip. The drill otherwise is in good
shape. But she may be headed to drill heaven if I
dont find these parts,
 

I should have a few good metal tubes and maybe a couple real good boxes for them..left over from our Van Brunt 13 hole drill..

Not sure about sending them..never sold anything on here like that..

I also have a few good parts for a JD 116W Baler..
Springs, shear pins, a couple good wire guides with wheels..I think one Pick-up shoe (same as new)..may even be a few Plunger knives somewhere..

Ron..
 
Use the flex rubber drops and attach them with a piece of 17guage wire wrapped around the funnel on the top. I have been using the flex rubber ones for twenty years and would not go back to either the hard rubber or the metal ones. If you would like I will email you a picture of how mine are installed.

JWalker
 
We just use 1" hose on ours. We have a couple original metal drops on the grass seeder part, but most have been replaced by hose. It drops in front of/next to the coulters and the alfalfa stand always looks good.

Scrapping a drill for such a simple part seems to be a waste...

Donovan from Wisconsin
 
JWalker, My email address is [email protected] Send the pictures if you will. thanks for your time.BushHog Papa dont forget me yet. I may need to try and work something out with you yet. thanks
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top