12251HD

Member
Pulled this old steel wheel case plow out of a fence row. Bent drive wheel, missing moldboard, and broken coulter arm. I have no use for it. Hate to see good American iron end up as part of a Chinese warship. Located in SE OH.
a86889.jpg

a86891.jpg

a86892.jpg

a86893.jpg
 
What part of southeast Ohio. Have a friend that needs some parts. What size plow 12", 14" or 16"? is the tail wheel Good? Are there any usuable shares, repairable? How is the moldboard that is on there, usuable or repairable? Then how much?
 
Leroy, Located near Zanesville, OH. I live in VA, so can't physically check until Nov 1st. Would guess it's a 14", but can't be certain. Tail wheel looked OK--frankly, I was surprised at how well the tail wheel assembly was built and not broken up like most old plows. Remaining moldboard looked OK, but again I didn't inspect thoroughly. Didn't check shares. Rather than sending to scrap yard, it's free to anyone who can use it. E-mail me if interested.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top