Author	[Modern View]
oldfarmall 10-14-2012 16:11:55 69.129.14.194 Report to Moderator	Hello- I am trying to find if someone has a source for reasonably priced clutch facing for balers. I have an IH mccormick model 45 baler. I need to replace the friction slip clutch facing that is on the flywheel. Original part number was 30718D. Can't find this anymore. The dimensions of the facing are 9" O.D.x 5 5/8" I.D. x 9/64" thick. Can anyone verify if this facing was used on other implements or tractors? Thanks! Jesse [Reply]   [No Email]
oldfarmall 10-18-2012 06:48:23 64.108.141.154 Report to Moderator	Re: Clutch Facing Material??? in reply to oldfarmall, 10-14-2012 16:11:55   Thanks for all the help everyone on finding clutch facings for my baler. I did a search on Ebay and found a NOS set of clutch facings for a 1936 Oldsmobile car for $10.00. They are the exact dimensions as my baler facings. I just have to drill some new holes in the plate the facing attaches to and take it to a guy I know who has a rivet machine. Also, does anyone have any thoughts on some sort of adhesive to attach the facings to the plate instead of rivets? Thanks! Jesse [Reply]  [No Email]
BobH in NH 10-15-2012 10:16:01 75.67.226.29 Report to Moderator	Re: Clutch Facing Material??? in reply to oldfarmall, 10-14-2012 16:11:55   Check out HEDGEPETH SUPPLY 1406 HEDGEPETH ROAD CANMER KY 42722 PHONE 270-528-2133 I posted here for clutch discs for my Ford 532 back in June 08 and received the following reply: "call me at 270-528-2133 ask for larry we sell slip clutch disks for 6-12 dollars each." I ended up not needing them so never called him. May be worth a call. [Reply]  [No Email]
JerseyJoe 10-14-2012 18:17:37 74.90.145.6 Report to Moderator	Re: Clutch Facing Material??? in reply to oldfarmall, 10-14-2012 16:11:55   You can also check Mcmaster Carr website,they may have what you need. [Reply]  [No Email]
dboll 10-14-2012 17:43:53 209.23.168.100 Report to Moderator	Re: Clutch Facing Material??? in reply to oldfarmall, 10-14-2012 16:11:55   check with JD, I found facings for my 200 Case baler there for alot less than Case wanted, Weasler made the slip clutches for IH, jd, Case ect. [Reply]  [No Email]
Bob Collins 10-14-2012 16:38:22 50.33.68.71 Report to Moderator	Re: Clutch Facing Material??? in reply to oldfarmall, 10-14-2012 16:11:55   You can buy clutch/brake material in the size you want from Rusco-X Materials, Co. Inc in Connecticut. (800) 550-7413. The stuff they sell is non-asbestos. I have had good service from them. [Reply]  [No Email]
cooop 10-14-2012 16:24:11 74.206.44.182 Report to Moderator	Re: Clutch Facing Material??? in reply to oldfarmall, 10-14-2012 16:11:55   Try to find a clutch shop near you that relines brake shoes and clutches. Also if you do find somewhere like this, ask for a modern, non-asbestos clutch material. good luck. [Reply]  [No Email]