Ford 4600 hydraulic levers

Anonymous-0

Well-known Member
I have a loader plugged in and the levers to the right of the seat wont always stay were you put them as you are using the loader controls. Just wondering why it does that and if you can do something to make them stay were you want them. The previous owner had a wire to hook on there and hold them in the right position. Thanks
 
Put the wire back on. Or a rubber strap. Sounds to me like the remote levers are working just like they should. Kicking out when they're under load. If they didn't,and you were using them to raise an implement,they would just set there blowing oil through the relief valve and it would overheat. That's why they kick out. To prevent that from happening.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top