Author	[Modern View]
4020deereboy 10-11-2012 22:29:33 205.185.95.11 Report to Moderator	on a melroe 903 spring reset plow how do you adjust the trip tension there is a spacer and there was also some machine bushings are the machine bushings factory or did somebody add them latter just wondering if i can change that spacer to a shorter one or what? thanks shaun [Reply]   [No Email]
jon f mn 10-12-2012 03:16:19 70.197.192.206 Report to Moderator	Re: melroe 903 plow in reply to 4020deereboy, 10-11-2012 22:29:33   If by trip tention you mean how much it takes to trip the bottoms that is adjusted by that P shaped piece that is between the trip mechanism and the main frame. Smaller = harder to trip. Don't know if new are still available, but if you want harder you could probly grind them down some. They are excelent plows, we used one for many years with no problems. [Reply]  [No Email]
4020deereboy 10-13-2012 13:57:24 205.185.95.11 Report to Moderator	Re: melroe 903 plow in reply to jon f mn, 10-12-2012 03:16:19   thanks for the reply i see the piece your talking about i will grind a little off it [Reply]  [No Email]