I just bought a NI 324 Gathering unit with 326 Husker.
The short front section of the pto shaft will not telescope out to the tractor. I have soaked it from both directions, and tried beating on crowbar through front u-joint with BFH and it still won't move. The rod is completed enclosed with shield from end to end..
What next? Remove rear cross and take to IH SHop in town?
The short front section of the pto shaft will not telescope out to the tractor. I have soaked it from both directions, and tried beating on crowbar through front u-joint with BFH and it still won't move. The rod is completed enclosed with shield from end to end..
What next? Remove rear cross and take to IH SHop in town?