Topic: Re: wheel bolts to drive in wheel studs?
|Implement Alley Discussion Forum|
[Show Entire Topic] [Return to Forum]
[Show Entire Topic]
[Return to Forum]
[Add a Reply]
Probably wouldn't be that hard to find hubs to fit your spindles and switch them over that way. I don't know how much experience you have fixing stuff I'll share a few thoughts-drilling or reaming them for studs sounds like a sound idea but getting the new larger holes exactly where they are supposed to be could be difficult,if they're a bit off your wheel may not be centered and it's going to hop when you pull it at any speed, this might be a job for a machine shop and someone still has to figure out if the hub has enough meat to bore out the stud holes and not get weakened in the process. Bolts through from the backside may have merits, just make sure the bolts you use are as good or better than wheel studs or lug bolts or you could have wheels flying off, there's never a good time for that. I guess I'm saying the safest way is new hubs, from there it's your wagon, you know how much weight you haul, how fast and far you pull it, how much your cargo is worth, how much you have to loose if the patched hub fails and injures someone and your risk tolerance.
|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|
| Copyright © 1997-2013 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters