HELP IDENTIFY AC IMPLEMENT

CM BEHOUNEK · Sep 24, 2012

Was there a modle number for this spring tooth implement, or a manual for it? Its not hooking up to the tractor very good, on the D17 it is hitting the rear tires. it hooks into the snap coulpler, but dose it lift? Is it missing something?
Also what model of plow do I have here, What tractors do these implements go on? dose the plow lift? Thanks Chad see my link for photos.

http://www.flickr.com/photos/37952188@N03/
http://www.flickr.com/photos/37952188 N03/

Anonymous-0 · Sep 24, 2012

Its a field cultivator, the lift is done by hooking the chains up to the lift arms, in the coupler latches. Some of it looked a little home-made. If it's hitting your tires, spacing is too narrow.

just for fun · Sep 25, 2012

Plow appears to be a number 83 plow, that was one of A-C's semi-mount type plow. You will need to install a tranport valve in the hydraulic lift system to make it lift correctly, the lift arms first, then the hydraulic ram.

just for fun · Sep 25, 2012

Forgot to add, that system is for the WD45. Plow should fit WD45 and the D series.

Allis Dave · Sep 27, 2012

That's exactly like my 83 plow except it looks like someone added the truss bar for some reason. You also have a sprint tooth field cultivator. It's missing the top stabilizer bar that hooks to the round bar that the lift arms on the tractor are pressed onto. I have one like it also except mine has the square shanks that make a couple loops. Mine is also missing the stabilizer bar and I'm missing the gauge wheels.

Allis Dave · Sep 27, 2012

The stabilizer bar hooks to the bracket with the pin through it on the center of the toolbar, There are manuals sometimes on ebay.

HELP IDENTIFY AC IMPLEMENT

CM BEHOUNEK

Member

Anonymous-0

Well-known Member

just for fun

Member

just for fun

Member

Allis Dave

Member

Allis Dave

Member

Similar threads