(800) 853-2651
SHOP NOW

Where to buy Flat belts possibly 6 wide?

C

chad from michigan

Member
I want to hook up the old buzz saw for the old farmall H since I just bought 30 face cord of slab wood I thought the old buzz saw would work great. I need to get the old 6" flat belt replaced where do I get one or get one made? Also what kind of price am I looking at?
Thanks
 
all the farm supply places around here carries the belting you just have to put on the lacing you need to put it together with. go to the tractor supply web site they carry it on line and will ship
 
Most good farm and home places have baler belt stuff you buy by the foot and that works well. If not them a good tractor dealer also should sell the stuff. Or if you can find one as long as your wanting you could also buy a pre-made baler belt
 
Try ( Hit & Miss Enterpries Orwell, Ohio Phone (440)272-5335 ) has old style belting in different widths and plys.
 
Our Rubber Associates division can make up any length in 6 inch for you. Email open. Ship in 24 hours. Can beat any retailer price.
 
About a week ago I put a 6" rubber baler belt on my buzz saw. It works but I don't think it will hold up. I have 5 foot between pulleys and have an idler pulley to keep belt tight.I am picking up a lot of belt slap that I didn't have with the old style rubber canvas belt.When this belt goes bad I will order a rubber canvas belt. The 6" rubber canvas runs about $5.80 a foot in 3 ply and $10.00 + lacing .
 
If you have any friends or farmers that have older round balers chances are they might still have some old belting material laying around.
 
(quoted from post at 11:48:35 09/18/12) I want to hook up the old buzz saw for the old farmall H since I just bought 30 face cord of slab wood I thought the old buzz saw would work great. I need to get the old 6" flat belt replaced where do I get one or get one made? Also what kind of price am I looking at?
Thanks
Click to expand...

It would help to know where you are since Michigan is a big place
 
You must log in or register to reply here.

Similar threads

D
Roofing question - limited access to drive nails
2
Replies
25
Views
956
dhermesc
D
B
2 ton+ grass with a haybine
2
Replies
22
Views
1K
730virgil
7
M
New-to-me JD-A and JD-B Repair Tips
Replies
13
Views
751
Fixingfarmer
Fixingfarmer
G
1950 Farmall M Problems
Replies
12
Views
880
redforlife
R
L
A pile of ,,,stuff
2
Replies
20
Views
2K
rlp in Co.
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top