Author	[Modern View]
G-Daddy 09-12-2012 05:23:23 166.248.65.60 Report to Moderator	I am looking for the needles that go on the Massey Harris #3 baler. Mine have broken and I need to replace them but can not find them. I also would like to have a manual / parts list for the baler. If anyone knows where I could find these things for this old Massey Harris #3 hay baler let me know. It's and Oldie but a goody. [Reply]   [No Email]
Case Nutty 1660 09-12-2012 19:54:22 75.127.24.27 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to G-Daddy, 09-12-2012 05:23:23   these are three #3 MH balers I have that are going to Canada to a museum some day, to say MH on the original decals and serial plates the third has MF decals but still carries the MH serial plate I believe at some point it was repainted cnt [Reply]  [No Email]
chuck41 09-13-2012 06:04:51 216.105.235.79 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to Case Nutty 1660, 09-12-2012 19:54:22   Hi,Your balers are not 3's, they are 1's. The 3 was smaller and compact. Early ones were either grey or red depending on if sold thru Ferguson or Massey dealer. The Massey's were also sold as Massey Harris or Massey Ferguson some sold under Massey-Harris-Ferguson Ltd. Chuck [Reply]  [No Email]
Case Nutty 1660 09-13-2012 07:18:30 75.127.24.27 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to chuck41, 09-13-2012 06:04:51   ops sorry you are correct thank you for the orrection, heck I even have pics of the serial plates I just did not look at them, again sorry for the mix up cnt [Reply]  [No Email]
chuck41 09-12-2012 19:52:50 216.105.235.79 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to G-Daddy, 09-12-2012 05:23:23   Hi, I have an original parts list for a Massey- Harris, also 1 for Massey Ferguson 3 (mostly same 7.00 plus 2.00 postage for either. Chuck [Reply]  [No Email]
DeltaRed 09-12-2012 07:38:45 67.6.224.253 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to G-Daddy, 09-12-2012 05:23:23   Many Years ago(I started out with it) I had a Ferguson #12(factory painted grey).It was very similar to the Massey-Ferguson#3.Later Ibought a "new" M-F 12.Lots better machine.They all had some interchangable parts.The Massey Harris balers that I have seen were all of the"horsehead" variety. [Reply]  [No Email]
TGIN 09-12-2012 06:16:43 4.252.100.236 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to G-Daddy, 09-12-2012 05:23:23   Not to dought what anyone has said but if it is the same as the MF 3 I know where a baler is sitting . [Reply]  [No Email]
edward will 09-12-2012 05:28:17 24.129.236.91 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to G-Daddy, 09-12-2012 05:23:23   G Daddy Are you sure thats a Massey Harris or could it be Massey Ferguson? Jim Will [Reply]  [No Email]
Leroy 09-12-2012 05:39:20 69.88.205.38 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to edward will, 09-12-2012 05:28:17   I think there was one built under the Massey Harris name and in no way simular to the Massey Ferguson. Think my neighbor has one stored back. [Reply]  [No Email]
G-Daddy 09-12-2012 05:38:32 166.248.65.60 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to edward will, 09-12-2012 05:28:17   Positive, Massey Harris made farm equipment before it became Massey Ferguson. It's a great baler but old and hard to find parts. [Reply]  [No Email]
Richard Hare 09-12-2012 06:35:37 199.243.31.131 Report to Moderator	Re: Massey Harris #3 Square Hay Baler in reply to G-Daddy, 09-12-2012 05:38:32   Is it the one with the "Donkey Head " packer? We had one like that, and it made lovely bales. I'll look at our local scrap yard, as it is full of old farm stuff. [Reply]  [No Email]