Author	[Modern View]
Case Nutty 1660 09-01-2012 06:02:05 75.127.24.27 Report to Moderator	need a little input on a 466 baler I just bought, PO had a issue that resulted in breaking one of the knotter frames, I have no problem with replacing the broken parts but was wondering if this model is as ood as the 327/336 I have been around? this unit looks like them just bigger capacity? this one also has hyd tension (maybe this is equipped std with this) any way I got the baler for a very reasonable price as it was broken and wanted some thoughts before repairing to confirm my thought as it being well worth fixing, based on NH parts which I am familer with I would guess 300-400 should buy me what is trashed maybe less, does any one know what these are bringing in your areas? I have a hotline book that shows a good value in them yet thanks for any help cnt [Reply]   [No Email]
DeltaRed 09-01-2012 07:07:53 67.6.225.104 Report to Moderator	Re: JD 466 baler questions in reply to Case Nutty 1660, 09-01-2012 06:02:05   They are good balers,most have had a bazillion bales run through them.They were a very high capacity machine.It has to be FULL in order to make a good quality bale.Rake 2 or 3 windrows together if necessary.JD no longer makes "big chamber" machine.Other than that,they seem to bee good.Steve [Reply]  [No Email]
Case Nutty 1660 09-01-2012 09:26:43 75.127.24.27 Report to Moderator	Re: JD 466 baler questions in reply to DeltaRed, 09-01-2012 07:07:53   Thanks for the info Steve, I think I may put her up for sale once I repair and test run it as I do few small squares any more much easier to deal with rounds for me thanks again cnt tom [Reply]  [No Email]