Author	[Modern View]
tahonta 08-19-2012 12:17:37 98.125.176.35 Report to Moderator	have14t #27050 autofeed baler in seattle area. would like to have restored/reconded for show and demonstration purposes(maybe 100 bales a year0.Baler is in pretty decent shape sighy wise but stuck.turned fly wheel by hand .feint movement at plungerand pto shaft. don"t know anything about balers so am dumb on this machine.thought it would look neat behind my A in a parade,but also want it to work right.am looking for some professional help in Seattle area.most of dealer mechs.in area are too young to know much about machine..Need some steering in the right direction. [Reply]   [No Email]
David Snipes 08-20-2012 11:49:55 198.239.210.178 Report to Moderator	Re: jd 14t baler in reply to tahonta, 08-19-2012 12:17:37   Since you live in such a wet climate the baler probably needs lots of lubrication. Grease all the fittings and oil any area which might look like it should be moving. I've seen balers that sat around in a humid area which could not be cycled by hand, but if you hook a tractor up to them, they get moving. But definately get a manual. [Reply]  [No Email]
TomH in Pa 08-19-2012 18:07:57 67.235.10.94 Report to Moderator	Re: jd 14t baler in reply to tahonta, 08-19-2012 12:17:37   Balers look kid of complicated at first, but there's really not much to them. Get a manual and study the mechanism for a few minutes, it'll be pretty obvious how it's supposed to work. [Reply]  [No Email]