Little Wonder plow shears

soilfarmer · Sep 15, 2010

Im looking for 2 14 inch PN 521782R91 plow shears for my plow. I have tried IH with no success and they tried their obsolete parts sourse. Any ideas? 2 4 IH little wonder

Bret4207 · Sep 15, 2010

Try Farmer Browns Plow SHop or BW MacNair. Google them.BTW- are you after the points, the mould board or what? The Litlle Genius uses a one piece point and share.

IHCPloughman · Sep 16, 2010

(quoted from post at 23:57:34 09/15/10) Im looking for 2 14 inch PN 521782R91 plow shears for my plow. I have tried IH with no success and they tried their obsolete parts sourse. Any ideas? 2 4 IH little wonder

I looked through my parts books and could not come up with that number. Could you tell me the part number off the back of the moldboard. If I knew that I would know where to look in the books and I could maybe come up with other ideas for you.

bret4207-the Little Genius #8 built 27-60 could have had blacksmith shares, Plow Chief points and shares, or Super Chief "throw-away" shares.

Bret4207 · Sep 16, 2010

Are they multiple piece share and points? I've never seen a LG with anything but one piece share and point. But, I ain't seen every plow out there!

Gotta say I love my LG, best darn plows I've ever used.

soilfarmer · Sep 17, 2010

thanks for the help. i will try to fint a number on the molboard and get back with you.

AG in IN · Sep 17, 2010

You have a slightly odd share. It's 14 inch. It shows up in parts merchandiser catalogs from the late 1950's. It was originally factory hard surfaced according to my book. It should be a quick-attach share that uses an an eyebolt towards the center of the share and a 3/8 bolt toward the outside edge to attatch it. It subs to IH p/n 465 993 R91, (1984 superseded parts catalog) which is also hard surfaced. This number was available a couple of years back (I bought some, 2006 maybe?) from C-IH, but was NLA last I checked, even though it shows up when doing a parts search Messick's (C-NH dealer) website. The 0-554 series were the "Regular" shares, and any of the O-554 series shares will work, and be the easiest to find. OD554-51 still shows up on Messick's website also. Obsolete depots still have some of these: O-580 is an alfalfa share, O-574's are rice pattern/blackroots, O-566 is cobblestone, and O-670's are listed as 16" shares for 14" bottoms (overcuts). These should all "bolt up". Whatever you come up with, keep them all the same. Happy plowing, Andrew Ginter.

Little Wonder plow shears

soilfarmer

New User

Bret4207

Well-known Member

IHCPloughman

Member

Bret4207

Well-known Member

soilfarmer

New User

AG in IN

Member

Similar threads