I recently bought a A151 for my Farmall A. The hand lever that attaches to the front of the final drives has a spring with an angle-iron bracket. The gentleman who sold me the plow said it attaches to the left-side final drive with the spring in a vertical position. I must be missing something because I can"t seem to get it there.
Also, I previously came upon another lever assembly, but it has a short "L" bracket on the spring. Where would it attach - to the clutch housing under the cultivator rockshaft bearings?
Which one - the short or long bracket - is correct, or is one a later modification of the other?
Thanks for your help.
Also, I previously came upon another lever assembly, but it has a short "L" bracket on the spring. Where would it attach - to the clutch housing under the cultivator rockshaft bearings?
Which one - the short or long bracket - is correct, or is one a later modification of the other?
Thanks for your help.
