Farmall 400 implements

redblood · Sep 3, 2008

I have the Farmall 400 that my Grandfather bought new along with the 3 bottom plow and disc all fasthitch. I have picked up another plow. One plow has a disconnect point mounting, One has a spring on top of it no disconnect. both are 3 bottoms. I have been trying to find model numbers for these three items with no luck. Can anyone provide me with information to find the model numbers? i plan on repainting them this winter and wanted to put the model numbers back on them so my children will know. Thank you in advance.

Hugh MacKay · Sep 3, 2008

redblood: I don't quite follow your description, at least not 100%. IH built a 3 bottom trip beam model number 311. If the spring you mention is a hitch cushion spring on a plow with curved beams, very likely that one is a C-36. Could you provide photos. I have two dealer plow parts books, cover close to 65 plows over 30 years. That is not all of them. There are other 3 bottom fast hitch plows, thus I think photo would give most positive ID.

You can either send me an e mail or post those photos on YT implements page. If you chose to send them to me, I have to send you a reply, so you can attach photos to your second e mail.

redblood · Sep 4, 2008

These plows are not trip bottom plows. The one has a spring cushion hitch, one is a disconnect hitch no spring I beleive the number for the spring cushion hitch is 34-f30. I will try to take some pictures for positive Id. thank you.

redblood · Sep 25, 2008

I recently purchased an implement parts manual which answered all my questions. Thank you for your help.

Farmall 400 implements

redblood

Member

Hugh MacKay

Well-known Member

redblood

Member

redblood

Member

Similar threads