Farmall veggie cultivators

Do any of you have a picture/pictures of Farmall narrow row vegetable cultivators as used on the Super A and Super C tractors? I"d love to find a set of them....but a picture might help me fabricate a set. Thanks.

check this site out, may have something


http://www.external_link/display_product.asp?category=tractor_equipment&equip_type=farmall_supera&sku=Cult

Mark: If you wish to send me an e mail, I have several photos of my tool bar cultivators. I have center and rear mount tool bars up to 72" long. I have two complete sets and when I was comercially growing vegetables I operated my 130 on 60" wheel tread and my SA on 52" tread. With that combination I could plant one row 52" or wider, 2 - 30" rows, 3 - 20" rows, 2 - 26" rows and I also have a bed shaper that makes 36" beds on 52" tread tractor. I don't have any photos on that bed shaper, wouldn't send you one anyhow as I'm designing a new one. I don't like the old one and couldn't recommend something I don't like.

For the most part I have converted my cultivators to modern day S tines, although I still am able to use my IH 1-1/4" round shanks and 1/2"x1-1/2" shanks for certain jobs. I tried some vibra shank tooling, but couldn't get enough clearence under tractor. Today all I run on center mount tool bar is one shank each side of each row, those being shanks closest crop. I use my fast hitch tool bars, equipped with S tine shanks and sweeps for center of rows. If you don't have fast hitch, you can mount rear tool bars directly across, and clamp them to current rear mount cultivator lifts. My reasoning on very few center mount shanks, less lugging and tugging steel under the tractor.

Hugh,

I sent an email. My SA is a "52 model and old style hitch. I know that where"s there"s a will, there"s a way. I look forward to hearing from you.

Call me at 320-360-3365 about the cultivators
Thanks,Kevin