Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Parts for Van Brunt grain Drill

Welcome Guest, Log in or Register
Author 
brian

04-17-2000 18:47:00




Report to Moderator

Trying to restore my grandfathers old Van Brunt-John Deere Model F grain drill and need to replace several of the drive gears. Any sources of parts for this drill which we think was made in the late 30's or early 40's is appreciated.




[Log in to Reply]   [No Email]
JKF

04-23-2000 16:08:02




Report to Moderator
 Re: Parts for Van Brunt grain Drill in reply to brian, 04-17-2000 18:47:00  
I bought a FB drill, the same mfg, that had a broken gear.All I had to do is take the shaft dia size of keyway,and # of teeth to my local dealer, and they had it in a few days.I hope this helps.



[Log in to Reply]  [No Email]
Oilman

04-18-2000 05:50:23




Report to Moderator
 Re: Parts for Van Brunt grain Drill in reply to brian, 04-17-2000 18:47:00  
Brian, I was given a Van Brunt FB last year.It needed gates and a couple of tubes.I got them at my JD dealer.Good luck!!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy