Fawteen
Well-known Member
- Location
- Downeast Maine
I'm working on a model of a Gehl self-propelled forage harvester. It uses a 6 cylinder Waukesha gas engine. I don't know which specific engine, but the ones used in Oliver tractors should be very close.
I need some rough dimensions. Length and width of cylinder head and height from oil pan flange to top of valve cover would give me something to go on to get the overall size somewhere near right. Any other dimensions/pictures you could provide would be greatly appreciated.
If you have any of this information you'd be willing share, you can post it to this thread or email me directly at pfoxyATyahooDOTcom.
I'm going to cross-post to several boards to get the best coverage.
Thanks for any help!
I need some rough dimensions. Length and width of cylinder head and height from oil pan flange to top of valve cover would give me something to go on to get the overall size somewhere near right. Any other dimensions/pictures you could provide would be greatly appreciated.
If you have any of this information you'd be willing share, you can post it to this thread or email me directly at pfoxyATyahooDOTcom.
I'm going to cross-post to several boards to get the best coverage.
Thanks for any help!
