gaston ruiz
Member
Just trying to get a feel on the hydraulics. I was bored
- Thread starter gaston ruiz
- Start date
gaston ruiz
Member
It just holds it . The cab just needs the glass ,
gaston ruiz
Member
Hi Paul, the three point helps balance the blade. When I have the blade in an angle and I lower it one point gets lower than the other. The cab just needs the plexi glass
Absent Minded Farmer
Well-known Member
- Location
- Gehl Country, Wis.
Hey Gaston, I was thinking about you when I was doing some video editing earlier today. I have some filmstrips with their records that I'm copying to YouTube if you would be interested in watching them. I have one posted for the 560 & there is one coming up pertaining to the 403/503 combines. I'll leave a link below to the playlist. Check back in about a week or so & the combine videos should be posted by then.
Regards!
Mike
IH Filmstrips....
Regards!
Mike
IH Filmstrips....
charles Leddy
Member
Plexiglas does not make very good windows. It scratches easy and is hard to keep clean. It may be fine for your use but someone I knew made 4 different cabs some of the plexglas got changed out for safety glass. The combine glass on the lower front helped see the crop right in front. Only one cab ended up with Plexiglas until tractor caught on fire and burned up because it was just to big to buy glass for. The Combine got replaced with a newer Gleaner E with a factory cab on it. The first Tractor cab had wooden frame windows out of a shed & Sears & Roebuck. Cleddy>
<>
<>
gaston ruiz
Member
Thanks for the pictures , only the front and back window are going to be flat.all the other ones have a slight bend on them.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy