Gleaner M2 size.

Joe Pro

Member
Can anyone provide the rough dimensions of a Gleaner M2.
I'm looking at one and needing to know if it'll fit in my barn.
Thanks
Joe
 
Length- overall base..........266.5" 6769 mm
Width-overall base............118.4" 3007 mm
Height-.......................130.0" 3531 mm
Wheel Base-...................123.6" 3139 mm
Wheel Tread-Drive.............100 & 115" 2540 & 2921 mm

Dimensions are with standard tires of 18.4-30. 10 ply R1
 
Saw this thread earlier, was walking theough the shed and saw a tape measure just now, ah ha....

My M3 would fit in a 12 foot door opening if I moved the auger light off the top. Might have 2 inches of clearance.

And if I never ever go in the shed with grain in the tank, as thee tank folds up as it fills.

Years ago we had to chisel some concrete and saw an inch off the header to get my F in an 11 foot door.

The F2 fit, but it was mighty tight, I had to be careful with mud or snow it was tight.

Then the F3 had bigger wheels, and had to let the air out of the tires to squeez it in that 11 foot door. That was a pain.....

Paul
 
Neat! Could see it 3 miles away, the cloud of smoke and soot. Had a good day, wife enjoyed it too.

My first steam engine ride on the train, and wow are there stationary engines there just wow.

I was joking, 1. I wonder how many ho were there if you hooked every idling engine up to a lime shaft and cracked them open, what the output would be. 2. Wonder how many tons of scrap iron are sitting there, if you melted it all down? ;)


Paul
 
Thank you.
I looked around online and couldn't find anything.
I'm trying to decide how much space it'll take up in my barn that is already packed with equipment.
I guess I didn't realize that it was almost 23' long!!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top