NI 325 picker

rkc9700

Member
bought a 325 picker , 2 row30" does anyone know or culd tell me what the width between the tires is? wanting to hau; it on a flat bed but not sure if is too wide or what , to far too pull on the curvey and narrow roads . thanks , know it not a combine , but pretty close.
thanks for any ideas or info
 
Surprised you didn't get an answer, I will go measure mine.

You won't like the answer, the darn things are about square, length and width. It won't fit.... They shipped then originally standing on their back side, with the elevator off, hitch pointed up. Well actually in 2 pieces, the undercarriage and the picking unit seperate, but still vertical was the way.

It's hard to go sideways, take the elevator off and part of the hitch is easy but even that is wide, and difficult to take more of the hitch off.

Paul
 
all is well . we decided to just pull it home, took our time and on the place now. hooked up , ran, oiled and greased. need to tinker with a few minor items but I think it will pick corn. we don't do a lot , just going to faster than the one row we have now
 
Whew, good, I forgot my tape measure.... ;)

Yea, other than watching mailboxes, thry pull pretty good, I got mine home 60 miles or so. Someone else was interested in it, but they were 4 states away and couldn't figure out how to ship it for reasonable $$$, the owner was glad o came along and he could just hitch it on my pickup.

Paul
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top