IH 1420 clean grain elevator lower boot replacement

zooeyhall

Member
I need to replace the lower boot on the clean grain elevator on my IH 1420 combine.

I was wondering what's the best way to get this off.

I'm assuming I have to withdraw the auger. But on the Left side of the combine, there's a frame member in the way. So I can't slide it out that way.

Do I need to move the elevator housing up to do this.

Kinda scratching my head on what's the best approach. Haven't done this before.

Any advice appreciated!!
 
If you look at the left side there is a oval hole in the frame rail. Remove the cover from the rail if it is there. Remove both bearings from either end of the auger. Turn the auger to line up with the slot n the left side and screw it out far enough to remove the clean grain boot. Get a couple new bearings for auger.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top