IHC 303--replacing the concave

zooeyhall

Member
I need to replace the concave on my IHC 303. I was wondering how do to this, suggestions,and how hard it is to do.

The concave is rather heavy, and would like to know if it can be replaced by one person.

Any advice and/or help will be greatly appreciated!
 
(quoted from post at 15:11:59 10/20/16) I need to replace the concave on my IHC 303. I was wondering how do to this, suggestions,and how hard it is to do.

The concave is rather heavy, and would like to know if it can be replaced by one person.

Any advice and/or help will be greatly appreciated!

Hey there
A concave on a 303 is not that heavy
You will be able to handle it
Clean and lubricate everything and
It will be easier to take out
 
(quoted from post at 15:34:54 10/20/16)
(quoted from post at 15:11:59 10/20/16) I need to replace the concave on my IHC 303. I was wondering how do to this, suggestions,and how hard it is to do.

The concave is rather heavy, and would like to know if it can be replaced by one person.

Any advice and/or help will be greatly appreciated!

Hey there
A concave on a 303 is not that heavy
You will be able to handle it
Clean and lubricate everything and
It will be easier to take out
Hey there I'm in Indiana and facing the same problem. Anyone work on these?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top