M3 rasp bars?

paul · Oct 12, 2016

Any aftermarket rasp bars still made for the M series? I see Timpe and others discussed over the years, but there is little to no info on an actual source for buying any. Not sure where to look for such a thing.

Wasn't planning on changing in season, but dang tough beans, cut the early season ones fine, went to the three different full season beans yesterday and oh my, spent a couple hours to get a 3/4 hopper. Need to put the suction hose and clamps on the cutter bar, but if that doesn't do it will need to try something more......

Paul

big orange · Oct 12, 2016

(quoted from post at 04:41:08 10/12/16) Any aftermarket rasp bars still made for the M series? I see Timpe and others discussed over the years, but there is little to no info on an actual source for buying any. Not sure where to look for such a thing.

Wasn't planning on changing in season, but dang tough beans, cut the early season ones fine, went to the three different full season beans yesterday and oh my, spent a couple hours to get a 3/4 hopper. Need to put the suction hose and clamps on the cutter bar, but if that doesn't do it will need to try something more......

Paul

Agco parts still shows OEM parts so would assume aftermarkets are out there. Do you have the beater behind the cylinder speeded up? That helps alot.

4020 electrician · Oct 12, 2016

Precision Farm makes the enclosed cylinders for the M and L. It isn't that much more to buy an enclosed cylinder. Your supposed to get more capacity and better in beans???

M3 rasp bars?

paul

Well-known Member

big orange

Member

4020 electrician

Member

Similar threads